Most swirl marks and light scratches don’t come from driving. They come from washing. Grit on the paint gets dragged around by a mitt or sponge and leaves fine scratches you notice in the sun. This is the routine we use. It takes about an hour for a normal car.
What you’ll need
- Wheel cleaner and a wheel brush
- Snow foam (with a lance or pump sprayer) or a pre-wash spray
- Car shampoo and two buckets, ideally with dirt guards
- A wash mitt or wash pad
- A large drying towel
- A spray wax or ceramic spray to finish
1. Pick your spot
Wash in the shade, or early or late in the day. If the paint is hot, products dry on before you can rinse them, which leaves marks.
2. Clean the wheels first
Spray the wheel cleaner on cool wheels, leave it for a minute or two, then work it in with a brush, including behind the spokes. Rinse well. Doing the wheels first means brake dust doesn’t get splashed onto paint you’ve already washed.
3. Pre-wash
Rinse the car, then cover it in snow foam from the bottom up. Let it sit for a few minutes, but don’t let it dry. Rinse from the top down. On very dirty cars, spray a citrus pre-wash on the lower panels and front end first.
4. Two-bucket wash
Fill one bucket with shampoo and water and one with clean water. Wash one panel at a time from the roof down, in straight lines. Rinse the mitt in the clean bucket before it goes back in the shampoo. Leave the lower panels and bumpers until last, because they are the dirtiest.
5. Rinse and dry
Rinse thoroughly, then dry straight away with a large, soft towel. Lay it on the panel and pull it gently towards you rather than rubbing. Wring it out as it gets heavy.
6. Protect
Finish with a spray wax or ceramic spray. Mist it onto one panel, spread it with a microfibre and buff it off with a dry one. It adds gloss and makes the next wash quicker, because dirt doesn’t stick as well.
7. Glass, tyres and the inside
Clean the glass last with a glass cleaner and two cloths, one to clean and one to buff. Dress the tyres with an applicator. Inside, vacuum first, then wipe hard surfaces with an interior cleaner sprayed onto a cloth, not straight onto screens or buttons.
Looking after your microfibre
Wash microfibre on its own at a low temperature, with no fabric softener, and keep the wheel cloths separate from the paint cloths.

Share options